Stock code:SZ 002334
Product Inquiry
  • *Name:
  • Company:
  • *Country:
  • *E-mail Address:
  • Phone:
  • *Content:
Current location:Home  Products  Industrial Automation  Variable Frequency Drive  Elevator Control System
Elevator Control System
Door Machine Integrated Controller EC10
  • Door Machine Integrated Controller EC10
Door Machine Integrated Controller EC10

EC10 door operator controller adopts full closed loop servo control technology and integrated elevator car top control board with door operation controller. It aims to be used in conjunction with INVT EC100/EC160/EC300 series intelligent integrated machine, thus simplifying the configuration of EC-CTB elevator cart top control board and reducing the overall cost.

  • Features
  • Specification parameter
  • Classic case
  • Data download
  • 1. Full closed loop servo control technology/strong speed response capacity;

    2. Integrated with the function of elevator car top control board to simplify the wiring and application;

    3. Door open force limit/precise torque control/intelligent autotuning/test mode;

    4. Advanced limit function to ensure door operator operating smoothly and precisely;

    5. User-friendly parameter setup interface for convenient parameter setup;

    6. Abundant communication interfaces: support CAN, MODBUS and RS232.





    Technical indicator

    Performance control

    Control mode

    Closed loop vector control

    Speed control precision

    Close loop vector control: ±0.05%

    Starting torque

    Close loop vector control: 0Hz~180%

    Frequency resolution


    Current resolution


    Main function

    Support auto-tuning of motor parameters and encoder zero position under loaded mode in AC permanent magnet synchronous motor

    Support close loop vector control of AC permanent magnet synchronous motor under normal ABZ encoder mode

    Support auto torque boost, manual torque boost and over-excitation under magnetic flux vector control

    Support full pulse control mode

    Support door width autotuning

    Support auto presentation

    Support auto identification if blocked

    Drive overload  protection: 60s at 150% of rated current and 10s at 180%.

    Support drive overvoltage protection, undervoltage protection, overcurrent protection, output phase loss protection and phase-to-phase short circuit protection.

    Environment requirement

    Installation environment

    Free from direct sunlight inside the observation elevator, just, corrosive gas, combustible gas, oil mist, water steam and saline matters.


    Rated power can be applied only if the elevation is below 1000m, otherwise derate is necessary.

    Ambient temp

    -10~+40 (derate if the ambient temp is between 40~50)


    Less than 95% RH, no water condensation


    Less than 5.9m/s2(0.6g)

    Storage temp


    Heat dissipation mode

    Cooling fin

    Protection level


    Storage site

    Stored in clean and dry indoor location

    Transport tool

    Packed in standard packing box, transport tool can be automobile, train, airplane, freighter and other similar tool

    Transport vibration

    15m/s2(1.5g) when sine vibration is 9~200Hz

    • No Record
    • Name Editionformat format Size Date download
    • No Record
Related products recommended
Learn more about latest solutions and cases, please enter your email address to subscribe to
Online top

Our site uses cookies to provide you with a better onsite experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Cookie Policy .